Under what circumstances is it recommended to use the auto-mapping function?

RoboUP - 2025/05/21

Whether to choose Auto Mapping or Manual Mapping depends on your lawn conditions:

1) Auto-Mapping is ideal for lawns with clear physical boundaries that are visible, such as walls, bricks, stones, fences, hedges etc.

2) If the lawn’s boundary consists of a sparse or thin fence, like barbed wire, the mower may not detect it due to the material being too thin. It is recommended to use Manual Mapping in such cases.

3) If your lawn’s boundary consists of an incomplete or patchy area with scattered grass, the mower may detect the grass and have difficulty distinguishing the boundary of the lawn. It is recommended to use Manual Mapping in such cases.

4) If your lawn’s boundary consists of a bush or fence, the mower may attempt to pass under the bush. It is recommended to use Manual Mapping in such cases.

5) If the lawn does not have clear physical boundaries, you need to use Manual Mapping.

Depending on the scenario, you can select Auto Mapping or Manual Mapping. Please note：

For the 2025 model:

If the mower can detect a physical boundary, the Auto Mapping button will light up, and you can tap the ‘Auto’ button to switch to Auto-Mapping. If the mower cannot detect a physical boundary during Auto-Mapping, you need to switch to Manual Mapping and control it to move along the boundary to create a virtual map.

For the 2024 model:

Before starting mapping, please select Auto Mapping or Manual Mapping according to your lawn conditions and enter the corresponding interface.

0

Can the mower create multiple maps? After creating the map, can I move the Charging Station or RTK Base Station?